What kind of laser marking equipment should be selected for plastic materials to achieve better compatibility?

The common plastic materials on the market now include: ABS plastic (acrylonitrile butadiene styrene), PC (polycarbonate), PP plastic (polypropylene), PS plastic (polystyrene), PPS plastic (polyphenylene sulfide), PP polypropylene, PVC (polyvinyl chloride), PE (polyethylene), acrylic (polymethyl methacrylate), etc. What kind of Laser marking equipment should be selected for better compatibility?

Laiser Laser Editor recommendsUV Laser Marking Machine, which is suitable for almost all plastic materials. Because the minimum line width of ultraviolet light is 0.01 mm, that of green light is 0.02 mm; the minimum character of ultraviolet light is 0.06, that of green light is 0.1, etc., the marking effect of UV laser marking machine is better than that of green light.

As for the purity of the material, many customers may have the same misunderstanding, that is, the same product can produce the same effect. When Laisai Laser made samples for a customer before, his product was a cable with a sheath of PVC, PE, etc. The product colors were different, but the black and white cables could be marked out, very clear, and the gray was blurred. Then red and yellow cannot be marked because the material does not absorb light and is also plastic, but different marking effects will be encountered, which is a normal phenomenon of laser technology.

Therefore, not all plastic materials can be marked with the same laser marking machine, but it should be determined based on the actual test proofing effect and the engineer's advice. I hope everyone can truly understand their own plastic materials, and then go to regular laser equipment manufacturers for samples to quickly solve your problems.